Anyconnect Mac Download

Posted By admin  On 04.10.21


The Cisco AnyConnect VPN client is used to make a secure, direct connection to specific SolutionHealth resources.
The primary use of the Cisco AnyConnect VPN client is to allow authorized users to connect directly to desktops or shared servers using 'Remote Desktop Connection'.
PREREQUISITE:
- You must have the Cisco AnyConnect VPN client installed on your Mac OSX device (see below).
- You must have Microsoft Remote Desktop installed on your Mac OSX device (can be found in the Apple App Store).
- You must be enrolled in the Duo MultiFactor Authentication System and have your enrolled smartphone available.
- Refer to the main Remote Access Help Documents for additional information.
Instructions:
1. On your Mac OSX device, download the Cisco AnyConnect VPN client from the following location:
CISCO ANCONNECT VPN CLIENT - MAC OSX
2. Once the download is complete, locate and run the AnyConnect 'DMG' file.

3. Run the AnyConnect.pkg application.
4. Click 'Continue' to begin the installation process. Be sure to accept the license terms.
5. IMPORTANT - In the 'Installation Type' screen, only select the 'VPN' option. Leave all other options un-checked.
6. Allow the installation to complete and click 'Close'. When prompted, choose 'Move to Trash' to clean up the installation file.
7. Once the installation is complete, locate and launch the 'Cisco AnyConnect Secure Mobility Client' in your Mac OSX Finder.
8. Enter 'vpn.solutionhealth.org' in the connection window and click 'Connect'.
9. Select the desired group, enter your network login and password, then click 'Ok'
Group:
  • If you normally log into a Nashua/SNH computer, choose 'SNHMC_RPD'
  • If you normally log into a Manchester/EHS computer, choose 'Elliot_RDP'
Username: EHS or SNH Network Username
Password: EHS or SNH Network Password
IMPORTANT - If you receive a certificate error, you may safely ignore this error.
10. When prompted, approve the login request using the Duo Multi-Factor authentication app on your smartphone.
11. You should now be connected to the SolutionHealth Cisco AnyConnect VPN.
12. To connect to your work desktop or to server resources, you will need the 'fully qualified name' of your PC or desired server.
Example:
  • M10ITS-12345.snhmc.org
  • W12120A-W10.elliot-hs.org
IMPORTANT - to connect to the SNHMC 'IVE', use the name 'tscluster.snhmc.org'
13. Locate and launch 'Microsoft Remote Desktop' using your Mac OSX finder. (If you do not have this application, you may need to download it from the Apple App Store).
14. Click 'Add PC'
15. Enter the 'fully qualified name' of your PC, or to connect the the SNHMC 'IVE' enter 'tscluster.snhmc.org'. You may also assing a Friendly name for this connection. It will be saved next time you run Microsoft Remote Desktop.
16. When prompted, enter your network login and password and click Continue.
- If you normally log into a Nashua/SNH computer or to use the SNHMC 'IVE', use 'NTMCusername'
- If you normally log into a Manchester/EHS computer, use 'ELLIOTusername'
IMPORTANT - if you receive a certificate error, you may safely ignore this error and click 'Continue'.
17. When you are done, you may disconnect from the remote PC or server and disconnect from the Cisco AnyConnect VPN.

18. Procedure complete. Great Job!



Installing the VPN Client

Cisco anyconnect 3.1 free download. System Tools downloads - Cisco AnyConnect Secure Mobility Client by Cisco and many more programs are available for instant and free download.

Mac
  1. Download the AnyConnect VPN client for Windows. Note: If you're using Microsoft Edge, the program will download as a 'sys_attachment.do' file. You will need to rename the file to 'sys_attachment.msi'

    • If you have the Windows Surface Pro X tablet with an ARM-based processor, you should download the AnyConnect VPN client for ARM64.
  2. Click Run on the Open File – Security Warning dialog box.
  3. Click Next in the Cisco AnyConnect Secure Mobility Client Setup dialog box, then follow the steps to complete the installation. NOTE: We recommend you un-check everything (Web Security, Umbrella, etc) except for the VPN and the Diagnostic and Reporting Tool (DART). This will give you a minimal install. The other features are not supported so there's no need to install them.

Starting the VPN Client

  1. Download the Cisco AnyConnect installer for Mac. Double-click the InstallAnyConnect.pkg file to start the Cisco AnyConnect Installer wizard. When the Welcome window displays, click Continue. Select your hard drive as the destination where you want to install Cisco AnyConnect and then click Continue. Click Install to perform a standard.
  2. At Best VPN Analysis we have the expertise of a proven technical team of experts to analyse all the VPN services prevailing in the Anyconnect Vpn For Mac Download market, we keep a keen eye on newbies as well, so as to provide you the accurate analysis based on facts which helps shape up your decision for the best of your interest when it comes to your online security and privacy measure.
  3. Step 3 Download the Cisco AnyConnect VPN Client. Most users will select the AnyConnect Pre-Deployment Package (Mac OS) option. The images in this article are for AnyConnect v4.9.x, which was latest version at the time of.

Anyconnect 4.10 Mac Download

Starting at 5pm on Monday, July 12, 2021, the process of connecting to the VPN will change slightly. After you select the Connect button, a popup window will appear where you will enter your UCInetID and password. If you are enrolled in the Duo MFA system, you will then be prompted to use Duo. Please note that if you are unable to connect to the VPN using the new method, change the connection group in the pulldown menu to either 'UCI-classic' or 'UCIFull-classic'. The original login screen will appear where you'll enter your UCInetID and password. Below the password box, type the word 'push' (without the quotes) and then select OK. You will receive a push from Duo and will be able to login.

  1. Go to Start->Programs->Cisco->Cisco AnyConnect Secure Mobility Client to launch the program.
  2. Enter vpn.uci.edu in the Ready toConnect to field, then press the Connect button.
  3. A popup will appear where you will enter your UCInetID and password. By default, you will be connected to the Default-UCI connection profile/group. If you need to change this you can select your desired connection profile from the Group drop-down menu: (NOTE this window may be hidden slightly behind the login window)
    • UCIFULL – Route all traffic through the UCI VPN.
      • IMPORTANT: Use UCIFULL when accessing Library resources.
    • Default-UCI – Route only campus traffic through the UCI VPN. All other traffic goes through your normal Internet provider.
  4. Back in the login window, enter your UCInetID and password, then click OK.
  5. A banner window will appear. Click Accept to close that window. You are now connected!

Please note that if you are unable to connect to the VPN using the new method for whatever reason, follow these steps instead.

  1. Enter vpn.uci.edu in the Ready toConnect to field, then press the Connect button.
  2. A popup will appear where you will enter your UCInetID and password. Do not enter your credentials yet. You must first change your connection group. (NOTE this window may be hidden slightly behind the login window)
    • UCIFULL-classic – Route all traffic through the UCI VPN.
      • IMPORTANT: Use UCIFULL-classic when accessing Library resources.
    • UCI-classic – Route only campus traffic through the UCI VPN. All other traffic goes through your normal Internet provider.
  3. Back in the login window, enter your UCInetID and password, then click OK.
  4. A banner window will appear. Click Accept to close that window. You are now connected!

Disconnecting the VPN Client

When you are finished using the VPN, remember to disconnect.

Anyconnect Mac Download 4.9

  1. Right-click the AnyConnect client icon located in the system tray near the bottom right corner of your screen.
  2. Select Quit.